In Beijing, gas as a major urban area, the widespread use of clean energy, in its capacity as fuel gas boiler heating method has gradually become the new energy saving heating. However, many users do not know how to use the heating boiler after installation?

Boiler winter use (need both domestic hot water and heating needs)

When we need heating, press the key to open the heating, the boiler will automatically ignition, circulation pump hot water boiler heating circuit in between the main heat exchanger, piping, floor heating, radiator loop. The control system automatically adjusts the heat output of the burner, in order to meet the heating demand. When the heating temperature is gradually increased, close to the set temperature, the gas volume of the gas valve gradually reduced, saving energy and improving efficiency. When the water temperature reaches the set requirements, the burner flame, boiler return to standby, waiting for a response the next heating demand, pumps and fans will continue to run for some time, exhaust heat boiler redundancy within.

Boiler summer use (hot water only)

When we hit the summer need to manually domestic water taps, the boiler will automatically ignite. Boiler circulating pump drive inside the main loop hot water heat exchanger between the primary and secondary heat exchanger loop, the auxiliary heat exchanger to heat transfer to the cold water from imported water closed loop. Domestic hot water is less than the maximum temperature 64 ℃, can prevent scale formation. The continuous supply of hot water until the tap is turned off. After closing taps, pumps and fans will continue to run for some time, exhaust heat boiler in redundancy.

How to use it to save gas boiler -? Add thermostat settings

Installation of a temperature control system on the boiler temperature control not only the freedom but also the effect of the gas savings can be achieved, such as: feeling a little hot room, boiler water temperature can be lowered through the thermostat, or may be temporarily out indoors temperature to low temperature, this will further save gas usage. How to save gas boiler? About boiler and boiler heating energy issues this end connections have a certain relationship, such as boiler and boiler than warm connection with the use of more energy-efficient heating connection, because the two systems at runtime Water needs are completely different, warm floor heating systems are low, and the heating system is running a high temperature, that the water temperature is set high and low energy consumption and boiler boiler has a direct relationship!